The magnetic bar filter is a device specially used to remove ferromagnetic impurities in the fluid, and the magnetic bar filter is a device specially used to remove ferromagnetic impurities in the fluid. When the fluid passes through the magnetic bar filter, the ferromagnetic impurities in it will be adsorbed on the surface of the magnetic bar, thus achieving the separation of impurities and making the fluid cleaner. Magnetic filter is mainly suitable for food industry, plastic processing, petrochemical, metallurgy, ceramic cosmetics, fine chemical industry and other industries. Here we introduce the installation and maintenance of magnetic filters.
Magnetic filter installation and maintenance:
1,The interface of the magnetic filter is connected to the slurry output pipeline, so that the slurry flows evenly from the filter, and the cleaning cycle is determined after a period of trial.
2, When cleaning, first loosen the clamping screw on the cover, remove the casing cover parts, and then pull out the magnetic rod, and the iron impurities adsorbed on the casing can automatically fall off. After cleaning, install the casing into the barrel first, tighten the clamping screws, and then insert the magnetic rod cover into the casing, you can continue to use.
3, when cleaning, the extracted magnetic rod cover can not be placed on the metal object to prevent damage to the magnetic rod.
4, The magnetic rod must be placed in a clean place, the magnetic rod sleeve can not have water.
Post time: Sep-06-2024