Membrane Filter Press for Brewing Pharmaceutical Industry
✧ Product Features
A-1. Filtration pressure: 0.8Mpa; 1.0Mpa; 1.3Mpa; 1.6Mpa. (Optional)
A-2. Diaphragm pressing pressure: 1.0Mpa; 1.3Mpa; 1.6Mpa. (Optional)
B. Filtration temperature: 45℃/ room temperature; 80℃/ high temperature; 100℃/ High temperature.
C-1. Discharge method - open flow: Faucets need to be installed below the left and right sides of each filter plate, and a matching sink. Open flow is used for liquids that are not recovered.
C-2. Liquid discharge method -close flow: Under the feed end of the filter press, there are two close flow outlet main pipes, which are connected with the liquid recovery tank. If the liquid needs to be recovered, or if the liquid is volatile, smelly, flammable and explosive, dark flow is used.
D-1. Selection of filter cloth material: The PH of the liquid determines the material of the filter cloth. PH1-5 is acidic polyester filter cloth, PH8-14 is alkaline polypropylene filter cloth. The viscous liquid or solid is preferred to choose twill filter cloth, and the non-viscous liquid or solid is selected plain filter cloth.
D-2. Selection of filter cloth mesh: The fluid is separated, and the corresponding mesh number is selected for different solid particle sizes. Filter cloth mesh range 100-1000 mesh. Micron to mesh conversion (1UM = 15,000 mesh---in theory).
E. Rack surface treatment: PH value neutral or weak acid base; The surface of the filter press frame is sandblasted first, and then sprayed with primer and anti-corrosion paint. The PH value is strong acid or strong alkaline, the surface of the filter press frame is sandblasted, sprayed with primer, and the surface is wrapped with stainless steel or PP plate.
F. Filter cake washing: When solids need to be recovered, the filter cake is strongly acidic or alkaline; When the filter cake needs to be washed with water, please send an email to inquire about the washing method.
G. Diaphragm filter press operation: Automatic Hydraulic Pressing; Automatic Filter Plate Pulling; Filter Plate Vibrating Cake Discharge; Automatic Filter Cloth Rinsing System.
H. Filter press feeding pump selection: The solid-liquid ratio, acidity, temperature and characteristics of the liquid are different, so different feed pumps are required. Please send email to inquire.
✧ Feeding Process
✧ Application Industries
It is widely used in solid-liquid separation process in petroleum, chemical, dyestuff, metallurgy, pharmacy, food, coal washing, inorganic salt, alcohol, chemical, metallurgy, pharmacy, light industry, coal, food, textile, environmental protection, energy and other industries.
✧ Filter Press Ordering Instructions
1. Refer to the filter press selection guide, filter press overview, specifications and models, select the model and supporting equipment according to the needs.
For example: Whether the filter cake is washed or not, whether the effluent is open or close, whether the rack is corrosion-resistant or not, the mode of operation, etc., must be specified in the contract.
2. According to the special needs of customers, our company can design and produce non-standard models or customized products.
3. The product pictures provided in this document are for reference only. In case of changes, we will not give any notice and the actual order will prevail.
Related products
-
Small Size Manual Jack Filter Press
✧ Workflow 1. Firstly, stir and mix the suspension, and then transport it from the feed port to the jack filter press. 2. During the filtration process, the suspended solids in the suspension are blocked by the filter cloth. Then, the filtrate is discharged from the bottom outlet. 3. The filtered and clear liquid (filtrate) is discharged along a channel system (open filtrate outlet) into the laterally mounted filtrate channel. The solid material, on the other hand, r...
-
China Ultra High Pressure Automatic Hydraulic C...
✧ Product Features A. Filtration pressure: 0.2Mpa B. Discharge method - open flow: The water out of the bottom of the filter plate is used with a receiving tank; Or matching liquid catching flap + water catching tank. C. Choice of filter cloth material: PP non-woven cloth D. Rack surface treatment: PH value neutral or weak acid base; The surface of the filter press frame is sandblasted first, and then sprayed with primer and anti-corrosion ...
-
PP Filter Press
✧ Product Features A、Filtration pressure: 0.5Mpa B、Filtration temperature：45℃/ room temperature; 80℃/ high temperature. C、Liquid discharge method：Each filter plate is fitted with a faucet and matching catch basin. D、The liquid that is not recovered adopts open flow; Close flow: there are 2 dark flow main pipes below the feed end of the filter press and if the liquid needs to be recovered or the liquid is volatile, smelly, flammable and ex...
-
Automatic Filter Press For Iron Ore Gold Ore Ta...
✧ Product Features A、Filtration pressure: 0.6Mpa----1.0Mpa----1.3Mpa-----1.6mpa (for choice) B、Filtration temperature：45℃/ room temperature; 80℃/ high temperature; 100℃/ High temperature. The raw material ratio of different temperature production filter plates is not the same, and the thickness of filter plates is not the same. C-1、Discharge method - open flow: Faucets need to be installed below the left and right sides of each filter plate...
-
Small Manual Jack Filter Press
✧ Product Features A、Filtration pressure≤0.6Mpa B、Filtration temperature：45℃/ room temperature; 65℃-100/ high temperature; The raw material ratio of different temperature production filter plates is not the same. C-1、Filtrate discharge method - open flow(seen flow): Filtrate valves (water taps) need to be installed ate the left and right sides of each filter plate, and a matching sink. Observe the filtrate visually and generally is used...
-
Food Grade Chamber Filter Press Filtration Of H...
✧ Product Features A. Filtration pressure＜0.5Mpa B. Filtration temperature: 45℃/ room temperature; 80℃/ high temperature; 100℃/ High temperature. The raw material ratio of different temperature production filter plates is not the same, and the thickness of filter plates is not the same. C-1. Discharge method - open flow: Faucets need to be installed below the left and right sides of each filter plate, and a matching sink. Open ...
