Automatic round Filter Press for Ceramic clay kaolin
✧ Product Features
- Filtration pressure: 2.0Mpa
B. Discharge filtrate method - Open flow: The filtrate flows out from the bottom of the filter plates.
C. Choice of filter cloth material: PP non-woven cloth.
D. Rack surface treatment: When the slurry is PH value neutral or weak acid base: The surface of the filter press frame is sandblasted first, and then sprayed with primer and anti-corrosion paint. When the PH value of slurry is strong acid or strong alkaline, the surface of the filter press frame is sandblasted, sprayed with primer, and the surface is wrapped with stainless steel or PP plate.
Circular filter press operation: Automatic hydraulic pressing, manual or automatic pull filter plate when discharging cake.
Optional devices of filter press: Drip tray, cake conveyor belt, water sink for receiving filtrate, etc.
E、Circle filter press supporting the choice of feed pump: High-pressure plunger pump, please email for details.
✧ Feeding Process
✧ Application Industries
Solid-liquid separation for stone wastewater, ceramics, kaolin, bentonite, activated soil, building materials and other industries.
✧ Filter Press Ordering Instructions
1. Refer to the filter press selection guide, filter press overview, specifications and models, select the model and supporting equipment according to the needs.
For example: Whether the filter cake is washed or not, whether the effluent is open or close, whether the rack is corrosion-resistant or not, the mode of operation, etc., must be specified in the contract.
2. According to the special needs of customers, our company can design and produce non-standard models or customized products.
3. The product pictures provided in this document are for reference only. In case of changes, we will not give any notice and the actual order will prevail.
Related products
-
Cotton Filter Cloth and Non-woven Fabric
✧ Cotton Filter Cloht Material Cotton 21 yarns, 10 yarns, 16 yarns; high temperature resistant, non-toxic and odorless Use Artificial leather products, sugar factory, rubber, oil extraction, paint, gas, refrigeration, automobile, rain cloth and other industries; Norm 3×4、4×4 、5×5 5×6 、6×6 、7×7、8×8、9×9 、1O×10 、1O×11、11×11、12×12、17×17 ✧ Non-woven Fabric Product introduction Needle-punched non-woven fabric belongs to a kind of non-woven fabric, with...
-
Small Manual Jack Filter Press
✧ Product Features A、Filtration pressure≤0.6Mpa B、Filtration temperature：45℃/ room temperature; 65℃-100/ high temperature; The raw material ratio of different temperature production filter plates is not the same. C-1、Filtrate discharge method - open flow(seen flow): Filtrate valves (water taps) need to be installed ate the left and right sides of each filter plate, and a matching sink. Observe the filtrate visually and generally is used...
-
Sludge Dewatering Machine Water Treatment Equip...
✧ Product Features * Higher Filtration rates with minimum moisture content. * Lower operating and maintenance costs due to efficient & sturdy design. * Low friction advanced air box mother belt support system, Variants can be offered with slide rails or roller decks support system. * Controlled belt aligning systems results in maintenance free running for a long time. * Multi stage washing. * Longer life of mother belt due to less friction o...
-
Small Hydraulic Filter Press 450 630 Filtration...
✧ Product Features A、Filtration pressure≤0.6Mpa B、Filtration temperature：45℃/ room temperature; 65℃-100/ high temperature; The raw material ratio of different temperature production filter plates is not the same. C-1、Filtrate discharge method - open flow(seen flow): Filtrate valves (water taps) need to be installed ate the left and right sides of each filter plate, and a matching sink. Observe the filtrate visually and generally is used...
-
Cast iron Filter Press high temperature resistance
✧ Product Features The filter plates and frames are made of nodular cast iron, high temperature resistance and have a long service life. Type of pressing plates method: Manual jack type, Manual oil cylinder pump type, and Automatic hydraulic type. A、Filtration pressure: 0.6Mpa---1.0Mpa B、Filtration temperature: 100℃-200℃/ High temperature. C、Liquid discharge methods-Close flow: there are 2 close flow main pipes below the feed end of the filt...
-
Stainless Steel Belt Filter Press For Sludge De...
✧ Product Features * Higher Filtration rates with minimum moisture content. * Lower operating and maintenance costs due to efficient & sturdy design. * Low friction advanced air box mother belt support system, Variants can be offered with slide rails or roller decks support system. * Controlled belt aligning systems results in maintenance free running for a long time. * Multi stage washing. * Longer life of mother belt due to less friction o...